published date : mar 13,2008 drawing no : sdsa 2375 v3 checked : shin chi p.1/4 part number: AUG14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com features 0.54 inch character height. low current operation. high contrast and light output. easy mounting on p.c. boards or sockets. categorized for luminous intensity. mechanically rugged. standard: gray face, white segment. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. AUG14A2-A green gap 1900 7990 565 common anode. rt. hand decimal absolute maximum ratings (t a =25c ) ug (gap) unit reverse voltage per segment or (dp) v r 5 v forward current per segment or (dp) i f 25 ma forward current (peak) per segment or (dp) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation per segment or (dp) p t 62.5 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3~5 seconds operating characteristics (t a =25c ) ug (gap) unit forward voltage (typ.) per segment or (dp) (i f =10ma) v f 2.0 v forward voltage (max.) per segment or (dp) (i f =10ma) v f 2.5 v reverse current (max.) per segment or (dp) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 565 nm wavelength of dominant emission (typ.) (i f =10ma) d 568 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 30 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf
published date : mar 13,2008 drawing no : sdsa 2375 v3 checked : shin chi p.2/4 part number: AUG14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com ? ug
published date : mar 13,2008 drawing no : sdsa 2375 v3 checked : shin chi p.3/4 part number: AUG14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com AUG14A2-A remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 13,2008 drawing no : sdsa 2375 v3 checked : shin chi p.4/4 part number: AUG14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com packing & label specifications AUG14A2-A
|
